| LUC Specifications | ||
| Construction | 1/10’’ Tufted Cut & Loop Pattern | |
| Yarn Composition |
100% Solution Dyed Heatset Polyproyplene
|
|
| Tufted Pile Weight | Ca. 1150 g/m² (34 oz/yd²) | |
| Total Weight | Ca. 2150 g/m² (63 oz/yd²) | |
| Pile Height | Ca. 7.5 mm (+/-5%) | |
| Total Height | Ca. 9.5 mm (+/-5%) | |
| Density | 169,850 tuffs/m² | |
| Secondary Backing | ActionBac® | |
| Standard Roll Size | 3.66 m x 30 m | |
| Pattern Repeat | 91.5 cm (W) x 91.5 cm (L) | |
| Performances (as tested by ITTS Inc. USA) | ||
| Stain Resistance | 10 (AATCC-175-2003) | |
| Static Control | Pass – Max. 4 kV (AATCC-134-1996) | |
| Tuft Bind | Pass – 6.5 lbs (ASTM-D-1335) | |
| Dimensional Stability | Pass – Max. 0.2% change (AACHEN) | |
| Flammability | ||
| – Pill Test | Pass – 8 (ASTM-D-2859-96) | |
| – Smoke Density | Pass – Max. 450 (ASTM-E-662-06) | |
| Colourfastness | ||
| – to light | Excellent – 5 (AATCC-16E) | |
| – to wet & dry crocking | Excellent – 5 (AATCC-165) | |
| – to ozone | Excellent – 5 (AATCC-129) | |
| Lifetime Antishock Carpet Warranty | ||
| Ideal for Residential and Hospitality Use. | ||
| The subfloor should be dry, smooth, flat, dust-free and resistant to compression and load-bearing. Where seaming is necessary, a seam sealant must be used for all such installations. Due to dye lot variations, actual color may vary slightly from the samples. Chair pads are recommended to prevent premature wear of carpet. | ||
| Manufactured in U.A.E | ||